Circuit
~~~~~~~

These examples use PyAEDT to show Circuit capabilities.

   .. grid-item-card:: Circuit schematic creation and analysis
      :padding: 2 2 2 2
      :link: ../../aedt_general/modeler/circuit_schematic
      :link-type: doc

      .. image:: ../../aedt_general/modeler/_static/circuit.png
         :alt: Circuit
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to build a circuit schematic and run a transient circuit simulation.

   .. grid-item-card:: Circuit Netlist to Schematic
      :padding: 2 2 2 2
      :link: ../../aedt_general/modeler/netlist_to_schematic
      :link-type: doc

      .. image:: ../../aedt_general/modeler/_static/netlist.png
         :alt: Netlist
         :width: 250px
         :height: 250px
         :align: center

      This example shows how to build a circuit schematic and run a transient circuit simulation.

   .. grid-item-card:: Automatic report creation
      :padding: 2 2 2 2
      :link: ../../aedt_general/report/automatic_report
      :link-type: doc

      .. image:: ../../aedt_general/report/_static/automatic_report.png
         :alt: Automatic report
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to create reports from a JSON template file.

   .. grid-item-card:: PCIE virtual compliance
      :padding: 2 2 2 2
      :link: ../../aedt_general/report/virtual_compliance
      :link-type: doc

      .. image:: ../../aedt_general/report/_static/virtual_compliance_eye.png
         :alt: Virtual compliance
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to generate a compliance report in PyAEDT using the VirtualCompliance class.

   .. grid-item-card:: Schematic subcircuit management
      :padding: 2 2 2 2
      :link: ../../high_frequency/emc/subcircuit
      :link-type: doc

      .. image:: ../../high_frequency/emc/_static/subcircuit.png
         :alt: Cable
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to add a subcircuit to a circuit design.
      It changes the focus within the hierarchy between the child subcircuit and the parent design.

   .. grid-item-card:: AMI Postprocessing
      :padding: 2 2 2 2
      :link: ../../high_frequency/layout/signal_integrity/ami
      :link-type: doc

      .. image:: ../../high_frequency/layout/signal_integrity/_static/ami.png
         :alt: AMI
         :width: 250px
         :height: 200px
         :align: center

      This example demonstrates advanced postprocessing of AMI simulations.

   .. grid-item-card:: Multi-zone simulation with SIwave
      :padding: 2 2 2 2
      :link: ../../high_frequency/layout/signal_integrity/multizone
      :link-type: doc

      .. image:: ../../high_frequency/layout/signal_integrity/_static/multizone.png
         :alt: Multizone
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to simulate multiple zones with SIwave.

   .. grid-item-card:: Circuit transient analysis and eye diagram
      :padding: 2 2 2 2
      :link: ../../high_frequency/layout/signal_integrity/circuit_transient
      :link-type: doc

      .. image:: ../../high_frequency/layout/signal_integrity/_static/circuit_transient.png
         :alt: Circuit transient
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to create a circuit design, run a Nexxim time-domain simulation, and create an eye diagram.


   .. toctree::
      :hidden:

      ../../aedt_general/modeler/circuit_schematic
      ../../aedt_general/modeler/netlist_to_schematic
      ../../aedt_general/report/automatic_report
      ../../aedt_general/report/virtual_compliance
      ../../high_frequency/emc/subcircuit.py
      ../../high_frequency/layout/signal_integrity/ami
      ../../high_frequency/layout/signal_integrity/multizone
      ../../high_frequency/layout/signal_integrity/circuit_transient