Twin Builder
~~~~~~~~~~~~

These examples use PyAEDT to show Twin Builder capabilities.

.. grid:: 2

   .. grid-item-card:: RC circuit design analysis
      :padding: 2 2 2 2
      :link: ../../low_frequency/general/twin_builder/rc_circuit
      :link-type: doc

      .. image:: ../../low_frequency/general/twin_builder/_static/rc.png
         :alt: TB RC
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a Twin Builder design and run a Twin Builder time-domain simulation.

   .. grid-item-card:: Wiring of a rectifier with a capacitor filter
      :padding: 2 2 2 2
      :link: ../../low_frequency/general/twin_builder/rectifier
      :link-type: doc

      .. image:: ../../low_frequency/general/twin_builder/_static/rectifier_response.png
         :alt: TB Rectifier response
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a Twin Builder design and run a Twin Builder time-domain simulation.


   .. grid-item-card:: Static ROM
      :padding: 2 2 2 2
      :link: ../../low_frequency/general/twin_builder/static_rom
      :link-type: doc

      .. image:: ../../low_frequency/general/twin_builder/_static/static_rom.png
         :alt: Static ROM
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to create a static reduced order model (ROM) in Twin Builder and run a transient simulation.

   .. grid-item-card:: Dynamic ROM
      :padding: 2 2 2 2
      :link: ../../low_frequency/general/twin_builder/dynamic_rom
      :link-type: doc

      .. image:: ../../low_frequency/general/twin_builder/_static/dynamic_rom_plot.png
         :alt: Dynamic ROM plot
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a dynamic reduced order model (ROM) in Twin Builder and run a Twin Builder time-domain simulation.

   .. grid-item-card:: LTI ROM
      :padding: 2 2 2 2
      :link: ../../low_frequency/general/twin_builder/lti_rom_sml
      :link-type: doc

      .. image:: ../../low_frequency/general/twin_builder/_static/lti_rom.png
         :alt: LTI ROM plot
         :width: 250px
         :height: 200px
         :align: center

      This example shows how you can use PyAEDT to create a Linear Time Invariant (LTI) ROM in Twin Builder
      and run a Twin Builder time-domain simulation.

   .. toctree::
      :hidden:

      ../../low_frequency/general/twin_builder/dynamic_rom
      ../../low_frequency/general/twin_builder/rc_circuit
      ../../low_frequency/general/twin_builder/rectifier
      ../../low_frequency/general/twin_builder/static_rom
      ../../low_frequency/general/twin_builder/lti_rom_sml