EMC
~~~

These examples use PyAEDT to show some EMC applications.

.. grid:: 2

   .. grid-item-card:: Choke
      :padding: 2 2 2 2
      :link: choke
      :link-type: doc

      .. image:: _static/choke.png
         :alt: Choke
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a choke setup in HFSS.

   .. grid-item-card:: Eigenmode filter
      :padding: 2 2 2 2
      :link: eigenmode
      :link-type: doc

      .. image:: _static/eigenmode.png
         :alt: Eigenmode
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to automate the Eigenmode solver in HFSS.

   .. grid-item-card:: Flex cable CPWG
      :padding: 2 2 2 2
      :link: flex_cable
      :link-type: doc

      .. image:: _static/flex_cable.png
         :alt: Flex cable
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a flex cable CPWG (coplanar waveguide with ground).

   .. grid-item-card:: Cable parameter identification
      :padding: 2 2 2 2
      :link: armoured_cable
      :link-type: doc

      .. image:: _static/armoured.png
         :alt: Cable
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create see a 4 Core Armoured Power Cable.

   .. grid-item-card:: Busbar analysis
      :padding: 2 2 2 2
      :link: busbar
      :link-type: doc

      .. image:: _static/busbar.png
         :alt: Busbar
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to use PyAEDT to create a busbar design in Q3D Extractor and run a simulation.

   .. grid-item-card:: Schematic subcircuit management
      :padding: 2 2 2 2
      :link: subcircuit
      :link-type: doc

      .. image:: _static/subcircuit.png
         :alt: Cable
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to add a subcircuit to a circuit design.
      It changes the focus within the hierarchy between the child subcircuit and the parent design.


   .. grid-item-card:: Circuit schematic creation and analysis
      :padding: 2 2 2 2
      :link: ../../aedt_general/modeler/circuit_schematic
      :link-type: doc

      .. image:: ../../aedt_general/modeler/_static/circuit.png
         :alt: Circuit
         :width: 250px
         :height: 200px
         :align: center

      This example shows how to build a circuit schematic and run a transient circuit simulation.

   .. grid-item-card:: RF interference
      :padding: 2 2 2 2
      :link: ../antenna/interferences/index
      :link-type: doc

      .. image:: ../antenna/_static/emit_simple_cosite.png
         :alt: EMIT logo
         :width: 250px
         :height: 200px
         :align: center

      These examples use PyAEDT to show some general capabilities of EMIT for RF interference.

   .. toctree::
      :hidden:

      choke
      eigenmode
      flex_cable
      armoured_cable
      busbar
      subcircuit
      ../../aedt_general/modeler/circuit_schematic
      ../antenna/interferences/index