HFSS#
These examples use PyAEDT to show HFSS capabilities
This example shows how to use PyAEDT to create a dipole antenna in HFSS and postprocess results.
This example shows how to use PyAEDT to create an antenna array.
This example shows how to use the Stackup3D class to create and analyze a patch antenna in HFSS.
This example shows how to use PyAEDT to model and simulate a unit cell for a frequency-selective surface in HFSS.
This example shows how to use PyAEDT to create an HFSS SBR+ project from OpenStreetMap.
This example shows how to use PyAEDT to create a multipart scenario in HFSS SBR+ and set up a doppler analysis.
This example shows how to use PyAEDT to create an HFSS SBR+ project from an HFSS antenna and run a simulation.
This example shows how to use PyAEDT to create an SBR+ time animation and save it to a GIF file.
This example shows how to use PyAEDT to create a choke setup in HFSS.
This example shows how to use PyAEDT to automate the Eigenmode solver in HFSS.
This example shows how to use PyAEDT to create a flex cable CPWG (coplanar waveguide with ground).
This example uses a coil tuned to 63.8 MHz to determine the temperature rise in a gel phantom near an implant given a background SAR of 1 W/kg.
This example shows how to use PyAEDT to create a multiphysics workflow that includes Circuit, HFSS, and Mechanical.
This example shows how to build and analyze a four-pole X-Band waveguide filter using inductive irises.
This example shows how to use PyAEDT to create a spiral inductor, solve it, and plot results.
This example shows how to create a project from scratch in HFSS and Icepak.
This example shows how to create a two-way coupling between HFSS and Icepak.